Minelab F3 Manual de servicio Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
42
NOISE CANCEL
2 metres
Figure 29: Operating Detectors in Close Proximity
5.8 Completion of Operations. At the completion of
operations, the F3 should be checked with the Test Piece before
switching off to ensure satisfactory performance before being
packed away. Once completed:
a. Turn the detector off.
b. Clean the detector and inspect for any signs of damage (Chapter
6).
c. Remove the batteries from the Battery Pack and stow in the
Hard Case or Soft Carry Bag.
d. Disconnect the Earset.
e. Retract the Middle and Lower Shafts rotating the Coil to the
stowed position.
f. Stow the detector in the Hard Case or Soft Carry Bag.
g. Check all components are accounted for (especially the Test
Piece and Earset) and are correctly packed.
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49

Comentarios a estos manuales

Sin comentarios