Minelab F3 Manual de servicio descargar pdf (Pagina 11)

e. Unlock the Battery Pack Lid by twisting the Battery Lock Lever

counter clockwise one-quarter turn. Once unlocked, pull the lid

away from the Battery Pack (the lid will stay attached to the

Battery Pack by a tether – Figure 5).

P0615-A

Battery

Map

Battery

Pack

Battery

Pack Lid

Battery

Lock

Lever

Figure 5: Removing the Battery Pack Lid

f. Using the battery maps, located on the side of the Battery Pack

and on the inside of the Battery Pack Lid, insert four D cell

batteries. Replace the Battery Pack Lid and rotate the Battery

Lock Lever clockwise one-quarter turn. If the batteries are

inserted incorrectly, the F3 will fail to function when switched on.

NOTE

The F3 requires 4 D cell batteries for operation. Use only high

quality alkaline (LR20) or rechargeable batteries. Minelab

recommends that only rechargeable batteries with a capacity of

4000 mAH or greater be used with the F3. Rechargeable batteries

have specific charge/discharge maintenance requirements, which

should be strictly followed to ensure maximum battery life. Only

NiCad and NiMh type D cell rechargeable batteries are suitable for

use with the F3.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 48 49

Sin comentarios

Minelab F3 Manual de servicio Pagina 11