Minelab Safari Manual de instrucciones descargar pdf (Pagina 8)

6

Attaching the Lower Shaft to the

Upper Shaft:

1 Release the Upper Shaft camlock by pulling

the lever away from the shaft.

2 Feed the coil cable up through the inside

of the Upper Shaft, ensuring the camlock

side of the shaft is facing the ground.

Connecting the Shaft Assembly to the

Handle Assembly:

1 Release the Control Box camlock by pulling

the lever away from the Control Box.

2 Align and push the coil cable connector

into the socket underneath the Control Box,

rmly tightening the retaining ring

to secure.

3 Slide the Upper Shaft over the Lower Shaft,

so the coil cable appears out the top.

3 Push the Handle Assembly onto the Upper

Shaft, as far as it will go.

4 Lock the Control Box camlock by pushing

the lever at onto the Control Box.

Assembly

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comentarios a estos manuales

Sin comentarios