Minelab X-Terra 50 Manual de instrucciones Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
48
49
1
2
1
2
1
3
4
5
AL
1
3
4
5
AL
1
3
4
5
AL
Menu scale
segments will
ash for 3
seconds while
calibrating the
channel
x2
There is no loss in depth or sensitivity if
the noise cancel channel is changed.
The detector may become noisy or erratic
due to electrical interference from powerlines,
electrical equipment or other detectors
operating close by. This interference is
interpreted as a crackling or popping noise.
Noise Cancel* allows you to change the noise
cancel channel so that you experience less
interference. Three channels are available,
represented by the numbers -1, 0 and 1 and
are also indicated on the menu scale.
It is best to choose a channel with the coil
in the detection (horizontal) position because
interference received in a vertical position may
be di erent from the interference received
in the horizontal position.
The coil should be held in the air and away
from large targets when changing channels.
Noise cancel channels = -1, 0, 1
Factory preset noise cancel channel = 0
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comentarios a estos manuales

Sin comentarios