Minelab X-Terra 50 Manual de instrucciones descargar pdf (Pagina 32)

58

59

Start Up Sequence

When the detector is turned on, there is

a short three note tune during its start up

sequence.

Positive Acknowledgement

The detector emits a short beep for

every accepted key press.

Negative Acknowledgement

The detector emits a low double beep

to indicate an invalid keypress.

Completed

A three note tune indicates the completion

of a function (e.g. noise cancel* channel

calibration).

Patterns Erased / Factory Preset

A six note tune will announce when

these settings are complete.

Target Response

This is the sound given by the detector when

a target is located and not discriminated

against (rejected). Generally a target that

is highly conductive (e.g. a large silver coin)

emits a high tone beep. A low tone beep

is produced for ferrous targets.

Pinpoint Response

When in pinpoint, the detector emits a

variable tone, that increases in pitch and

volume as the coil gets closer to the target.

Noise

A random jittery sound indicates that the

detector is picking up external interference.

Sensitivity or noise cancel* should be

adjusted.

False Detections

A partial or chopped non-repeatable signal.

Two dashes will indicate on the LCD to

indicate a rejected target.

30

50

The X-Terra 50 discrimination segments are

separated by 4 diﬀ erent tones of sound

Error

A six note tune will sound to indicate

a detector error

(Error Messages, pg. 60).

Overload

If the coil is passed across a large shallow

target, the detector will give a repeating

buzzing sound. This indicates that the

target signal is too strong for the detector

to interpret.

Low Battery Signal

When the battery power becomes low,

there will be a short announcement tune

(descending tones) every 60 seconds.

Low Battery Shutdown

A long announcement tune (descending

tones) will sound just before the detector

shuts down.

The X-Terra 30 discrimination segments are

separated by 3 diﬀ erent tones of sound

Low Medium High

Medium

Low

Medium

High

Low High

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios